Capsule Game Feeder

Price: $1,099.00

$1,499.00 1000# 10 in stock
$1,738.00 1000# with tray kit 10 in stock
$1,099.00 500# 10 in stock
$1,278.00 500# with tray kit 10 in stock

Detailed Description

Specifications

Reviews

The Capsule game feeder comes in 500 lb or 1000 lb capacities. A heavy duty motor, an auger, a spinner plate, a heavy duty 12v/7ah battery, a solar charger, a timer and a varmint guard are all included with each feeder. Invest in one of these feeders and you will never stand on a ladder or have to use winches to fill your feeders again. These feeders also keep varmints out for good and are indestructible by pests like wild hogs.

Capsule Feeders assemble in minutes using seven Phillips-head bolts. The unit is almost four foot in diameter and weighs about 100 lbs when empty. Two units (assembled) can fit in the back of a standard pickup truck.
Typically used as a broadcast feeder for corn or fish food, the spinner can be removed for use with protein or pellet trays. Corn and pellets and milo may be combined if desired. Capsule feeders are designed to "completely empty", using a first-in first-out feed cycle.
Heavy duty molded-in handles make moving it a breeze. A short rebar or "T" post can be driven through the handle for added security although rarely required.
All Capsule feeders come with a 20 Year Limited Warranty.

A small tray kit is also available for the 500 lb Capsule feeders:

The small tray kit is typically used to feed pellets. Made of 3/8" tough, high density polyethylene, the tray cannot be chewed up by animals. It will not rust or corrode. The tray comes with a durable skirt to deflect feed into the tray. Most users remove the spinner plate so feed flows gently into the tray. Perforated to allow water to drain, the tray holds about 20 lbs of feed or corn.
The small tray attaches quickly and securely to the standard feeder using existing assembly bolts. When installed, the tray is about 33 inches off the ground, 27 inches in diameter and four inches deep.

A large tray kit is also available for the 500 lb and/or the 1000 lb Capsule feeders:

Designed to use with both the 500 lb and 1000 lb feeders. Four trays are securely fastened to the cone using eight large phillips bolts. The bolts screw into heavy duty brass lugs that are molded into every capsule feeder. A skirt is attached to deflect the feed into the tray. When the spinner plate is removed, feed flows gently into the trays.
The large tray kit is molded of thick high-density polyethylene plastic. Perforated for drainage, the trays will not rust or corrode.
When installed on the 1000 lb feeder, the tray is about 33 inches off the ground. When used with the 500 lb feeder, the trays are about 20 inches off the ground. The large tray kit holds approximately 40 lbs of feed.

E-mail a friend about this item.

Return to Catalog