Watermark Texas Direct Hunting Products

Feeder Parts and Accessories at Texas Direct Hunting Products

Showing 66 product(s) for Feeder Parts and Accessories (1-25 of 66)

12-volt High Torque Deer Feeder Motor 12-volt High Torque Deer Feeder Motor
High torque 12-volt automotive grade deer feeder motor, with flat plug wire connector. 1/4" shaft and 2 5/16" between mounting bolts.
Price: $26.00
 
12V Black Motor 12V Black Motor
Large 12v, 1/4" shaft feeder motor.
Price: $14.00
 
5/8" Hitch Pin Coupler for Receiver Bar 5/8" Hitch Pin Coupler for Receiver Bar
Curt Manufacturing 5/8" zinc hitch pin (coupling pin) with retaining clip.
Price: $4.95
 
55 Gallon Protien Funnel Down Tube with Head 55 Gallon Protien Funnel Down Tube with Head
This funnel and down tube turn any 55 gallon drum into a protien feeder.
Price: $115.00
 
55 Gallon Protien Plate with Down Tube and Head 55 Gallon Protien Plate with Down Tube and Head
Down spout with plate and head
Price: $105.00
 
6-volt High Torque Deer Feeder Motor 6-volt High Torque Deer Feeder Motor
High torque 6-volt automotive grade deer feeder motor, with flat plug wire connector. 1/4" shaft and 2 5/16" between mounting bolts.
Price: $26.00
 
Basic Feeder Leg Foot Basic Feeder Leg Foot
6 X 6 Stamped Feeder Foot.
Price: $7.00
 
Belly Band - Heavy Duty Belly Band - Heavy Duty
This heavy duty belly band easily clamps around your metal barrel.
Price: $50.00
 
Belly Band - Light Duty Belly Band - Light Duty
This light duty belly band easily clamps around your metal barrel. No drilling required!
Price: $35.00
 
Black Slider Legs (T-Legs) for Control Units - Full Set Black Slider Legs (T-Legs) for Control Units - Full Set
One full set (both halves) of black powder coated replacement slider legs. Fits our galvanized FCU and FCU's by All Seasons, Ultramatic, West Texas Feeder, and others.
Price: $16.00
 
Black Slider Legs (T-Legs) for Control Units - Outer Set Black Slider Legs (T-Legs) for Control Units - Outer Set
One outer pair of black powder coated replacement slider legs ("T-Legs"). Fits our galvanized FCU and FCU's by All Seasons, Ultramatic, West Texas Feeder, and others.
Price: $12.00
 
Boss Buck "No Blow" Round Spinner Cup (4") Boss Buck "No Blow" Round Spinner Cup (4")
4" round cupped "No Blow" spinner from Boss Buck.  1/8" shaft.
Price: $7.50
 
Boss Buck Protein Tubes Boss Buck Protein Tubes
3- and 4-way protein snout tubes by Boss Buck.  You can use these with Boss Buck feeders or many other brands with a 4" outlet.
Price: $65.00
 
Brass Shaft Extension for Deer Feeder Motors Brass Shaft Extension for Deer Feeder Motors
Brass shaft extension for your deer feeder motor. Fits motors with 1/4" shaft. Used on Sweeney Feeders and HCR Feeders with internal controls.
Price: $26.00
 
Diamond Spinner Plate (weighted/heavy duty) Diamond Spinner Plate (weighted/heavy duty)
Heavy duty diamond shaped, open top spinner plate. Center weighted and balanced. Available to fit 1/4" shaft motors only.
Price: $15.00
 
Downspout - Standard Mini Funnel Downspout - Standard Mini Funnel
Standard 1 1/2" tall downspout for feeder barrel with 2" hole. Direct the feed right onto the spinner plate.
Price: $5.50
 
Downspout - Tall Mini Funnel Downspout - Tall Mini Funnel
2" tall downspout for feeder barrel with 1 3/4" spout. Directs the feed right onto the spinner plate.
Price: $5.50
 
Dutton-Lainson Brake Winch - 800 lb - DLB800A Dutton-Lainson Brake Winch - 800 lb - DLB800A
Dutton-Lainson DLB-800A brake winch. Automatic brake holds load in position when handle is released.
Price: $59.95
 
Dutton-Lainson Worm Gear Winch with Cordless Drill Socket Adapter WG1500 Dutton-Lainson Worm Gear Winch with Cordless Drill Socket Adapter WG1500
Dutton-Lainson WG1500 wormgear winch. 1500 lbs rating. Includes socket adapter so you can use your cordless drill to raise and lower the feeder!
Price: $109.95
 
Feeder Screen by Farr Outdoors Feeder Screen by Farr Outdoors
The Feeder Screen filters out debris and prevents clogs in your feeders.
Price: $23.95
 
Galvanized Metal Deer Feeder Barrel Lid Galvanized Metal Deer Feeder Barrel Lid
Galvanized steel lid for deer/game feeders.
Price: $29.00
 
Galvanized Slider Legs (T-Legs) for Control Units - Full Set Galvanized Slider Legs (T-Legs) for Control Units - Full Set
One full set (both halves) of galvanized replacement slider legs. Fits our galvanized FCU and FCU's by All Seasons, Ultramatic, West Texas Feeder, and others.
Price: $16.00
 
Galvanized Slider Legs (T-Legs) for Control Units - Outer Set Galvanized Slider Legs (T-Legs) for Control Units - Outer Set
One outer pair of galvanized replacement slider legs ("T-Legs"). Fits our galvanized FCU and FCU's by All Seasons, Ultramatic, West Texas Feeder, and others.
Price: $12.00
 
Game Hoist Game Hoist
2'' 360 Swivel Receiver, Cable, and Pulley
Price: $359.95
 
Gate Spinner - Open Top Gate Spinner - Open Top
Rectangular spinner plate with flaps ("gates") on each end to reduce spillage.  1/4" shaft only.
Price: $10.00

Result Pages:2 3 

Call us by Ring Central

Twitter

Facebook